Couplings

  • Chain Couplings, Type 3012, 4012, 4014, 4016, 5018, 6018, 6020, 6022, 8018, 8020, 8022

    Chain Couplings, Type 3012, 4012, 4014, 4016, 5018, 6018, 6020, 6022, 8018, 8020, 8022

    Coupling is the set of two sprockets for coupling and two strands of chains. The shaft bore of each sprocket can be processed, making this coupling flexible, easy to install, and highly efficient in transmission.

  • NM Couplings with NBR Rubber Spider, Type 50, 67, 82, 97, 112, 128, 148, 168

    NM Couplings with NBR Rubber Spider, Type 50, 67, 82, 97, 112, 128, 148, 168

    NM coupling consists of two hubs and flexible ring able to compensate all types of shaft misalignments. The flexiblerings are made of Nitile rubber (NBR) which have a high internal damping characteristic which enable to absorb and resists to oil, dirt, grease, moisture, ozone and many chemical solvents.

  • MH Couplings, Type MH-45, MH-55, MH-65, MH-80, MH-90, MH-115, MH-130, MH-145, MH-175, MH-200

    MH Couplings, Type MH-45, MH-55, MH-65, MH-80, MH-90, MH-115, MH-130, MH-145, MH-175, MH-200

    GL coupling
    It’s good if it lasts a long time. For many years, mechanical couplings have ensured that machine shafts are securely connected.
    In almost all industries, they are called the first choice for reliability。The product range covers couplings of a torque range from 10 up to 10,000,000 Nm.

  • MC/MCT Coupling, Type MC020~MC215, MCT042~MCT150

    MC/MCT Coupling, Type MC020~MC215, MCT042~MCT150

    GL Cone Ring couplings:
    • Simple uncomplicated construction
    • Requires no lubrication or maintenance
    • Reduce starting shock
    • Help absorb vibration and provide torsional flexibility
    • Operate in either direction
    • Coupling halves manufactured from high-grade cast-iron.
    • Each flexible ring and pin assembly can be removed by withdrawing them through the bush half of the coupling for ease of replacement of the flexible rings after long service.
    • Available in MC(Pilot bore) and MCT(Taper bore) models.

  • RIGID (RM) Couplings, Type H/F from RM12, RM16, RM25, RM30,RM35, RM40,RM45, RM50

    RIGID (RM) Couplings, Type H/F from RM12, RM16, RM25, RM30,RM35, RM40,RM45, RM50

    Rigid Couplings(RM Couplings) with Taper Bore bushes provide users with a quick and easy fixing of rigidly connecting shafts with the convience of a wide selection of shaft sizes of the Taper Bore bushes. The male flange can have the bush installed from the Hub side (H) or from Flange side (F). The female always has the bush fitting F which gives two possible coupling assembly types HF and FF. When using on horizontal shafts, select the most convenient assembly.

  • Oldham Couplings, Body AL, Elastic PA66

    Oldham Couplings, Body AL, Elastic PA66

    Oldham couplings are three-piece flexible shaft couplings that are used to connect driving and driven shafts in mechanical power transmission assemblies. Flexible shaft couplings are used to counter the inevitable misalignment that occurs between connected shafts and, in some cases, to absorb shock. Material: Uubs are in Aluminium, elastic body is in PA66.